1. Download the PHA3U03NGB.EXE file to a temporary or download directory (please note this directory for reference).
2. Go to the directory where the file was downloaded and double-click the PHA3U03NGB.EXE file to begin the installation.
3. At the "BIOS R0225U1 Update Utility For Windows 2000 and XP - InstallShield Wizard" box, click Next. Several setup boxes will briefly appear as the files are extracted and the computer model is identified. As these processes complete, the boxes will close automatically. The BIOS Update Disk Setup will launch.
   NOTE: If an "Information" box appears prompting you to reboot to verify the system model, click OK. After the computer restarts, please continue with step 5 above.
4. At the "Information" window, insert a blank 3½ floppy diskette to the floppy disk drive (A:) and click OK.
5. At the "Creating the CRISIS diskette on drive A:" screen, press ENTER.
6. At the "The CRISIS diskette in drive A: is being formatted" screen, press ENTER. Please wait as the floppy disk is formatted.
7. At the "Volume label (11 characters, ENTER for none)?" prompt, type in a name (such as BIOSUPD) and press ENTER.
8. At the "QuickFormat another (Y/N)?" prompt, press the N key and press ENTER.
9. Press ENTER a second time to continue. Please wait as the BIOS installation files are copied to the floppy disk.
10. At the "Press any key to continue..." prompt, press ENTER. Please wait as the BIOS installation disk is made bootable.
11. At the "Press any key to continue..." prompt, press ENTER.
12. At the "CRISIS diskette on drive A: successfully created" screen, leave the floppy disk in the drive and press ENTER.
13. At the "InstallShield Wizard Complete" screen, verify that "Yes, I want to restart my computer now" is selected and click Finish. Be sure to leave the bootable floppy disk with the BIOS files in the floppy drive. As the computer restarts, it will boot from the floppy disk instead of the hard drive. The Phoenix Phlash Utility will launch.
14. At the "Phoenix Phlash Utility" box, press the Y key to begin the update process. Please wait as the installation of the BIOS will take one to two minutes to complete. Once the installation is complete, the computer will automatically turn off.
15. Eject the bootable BIOS installation disk from the drive.
16. Turn on the computer.
17. At the black "SONY" screen, press the F2 key to enter the BIOS Setup.
18. At the "PhoenixBIOS Setup Utility" screen, press ESC key.
19. From the "Exit" menu, press the DOWN ARROW key until "Get Default Values" is highlighted.
20. Press ENTER.
21. At the "Setup Confirmation" box, verify "Yes" is highlighted and press ENTER.
22. From the "Exit" menu, verify "Exit (Save Changes)" is highlighted and press ENTER.
23. At the "Setup Confirmation" box, verify "Yes" is highlighted and press ENTER.

After the computer restarts, the installation of the BIOS update is complete.

This utility updates the computer system BIOS and resolves the issue where the system is unstable after returning from system standby mode.

• Before installing this update, be sure the computer is running from AC power. If the installation of the BIOS is interrupted by power loss, the computer may not operate correctly or at all!
• Before installing this BIOS update, please connect a floppy disk drive to the computer and make sure you have a blank 3½ floppy disk available. This program will format and create a bootable disk. All the data in the floppy will be erased when the disk is formatted!
• Please have a bootable floppy diskette available before proceeding to this BIOS update. Bootable floppy diskette can be created by formatting a blank diskette with the "Create an MS-DOS startup disk" option enabled. For additional assistance, please see Creating a Bootable Floppy Disk
• During the installation of this update, be sure that you are logged in as the Administrator or as a user with Administrative rights.
• To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
• It is highly recommended to print out these instructions as a reference during the installation process.