Home> Download sony Drivers> Download BIO1_1.EXE Drivers
Real Free Download BIO1_1.EXE driver file for sony
We Provide Real download link for BIO1_1.EXE driver file, you can download official sony BIO1_1.EXE drivers files free here, driver file size:1.31 MB, Just download BIO1_1.EXE driver files for your sony device now!
Download & Install Guide:
- Download the BIO1_1.EXE file to a temporary or download directory (please note this directory for reference).
- Go to the directory where the file was downloaded and double-click the BIO1_1.EXE file to begin the installation.
- At the "BIOS R0202U1 For Windows 2000 and Windows Me" box, click Next. Several setup boxes will briefly appear as the files are extracted and the computer model is identified. As these processes complete, the boxes will close automatically. The BIOS R0202U1 Setup will launch.
- At the "Creating the CRISIS diskette on drive A:" screen, press ENTER.
- At the "The CRISIS diskette in drive A: is being formatted" screen, insert the 3� formatted floppy disk into the floppy drive and press ENTER. Please wait as the floppy is formatted.
- At the "Volume label (11 characters, ENTER for none)" prompt, type in a name (such as BIOSUPD) and press ENTER.
- At the "QuickFormat another (Y/N)?" prompt, press the N key and press ENTER.
- Press ENTER a second time to continue. Please wait as the BIOS installation files are copied to the floppy disk.
- At the "Press any key to continue..." prompt, press ENTER. Please wait as the BIOS installation disk is made bootable.
- At the "Press any key to continue..." prompt, press ENTER.
- At the "CRISIS diskette on drive A: successfully created" screen, leave the floppy disk in the drive and press ENTER.
- Click the X in the top-right corner to close the "Finished - CRISDISK" box.
- At the "InstallShield Wizard Complete" screen, click Finish. Be sure to leave the bootable floppy disk with the BIOS files in the floppy drive. As the computer restarts, it will boot from the floppy disk instead of the hard drive. The PhoenixPhlash Utility will launch.
- At the "Phoenix Phlash Utility" box, press the Y key to begin the update process. Please wait as the installation of the BIOS will take one to two minutes to complete. Once the installation is complete, the computer will automatically turn off.
- Eject the bootable BIOS installation disk from the drive.
- Turn on the computer.
What this drivers do:
This utility updates the system BIOS and resolves the issue where the computer, while attached to the docking station (Docked), cannot boot to a BIOS floppy disk.
Important Note:
- Before installing this update, be sure the computer is running from AC power. If the installation of the BIOS is interrupted by power loss, the computer may not operate correctly or at all!
- Before installing this BIOS revision, you will need to prepare a 3½ bootable floppy disk. You will also need to have the USB floppy disk drive connected to the computer.
- For Windows 2000 upgrade systems only: During the installation of this update, be sure that you are logged in as the Administrator or as a user with Administrative rights.
- To ensure that no other program interferes with the installation, save all work and close all other programs. The Taskbar should be clear of applications before proceeding.
- It is highly recommended to print out these instructions as a reference during the installation process.
BIO1_1.EXE driver file for sony free download
| Driver File Name | BIO1_1.EXE |
| File Size: | 1.31 MB |
| Download | Download Free Now |